Paper Lantern Tea Light Lamp (Lantern Studies 1)

If you print one, tag me on instragram @tangent.objects. I’d love to see it. And if you enjoy it, a boost goes a long way 🧡 Enjoy this lamp? No. 2 and No. 3 are available as a file bundle Here For personal use only. Please don’t sell prints or re-upload these files. --- Lantern Studies No. 1 (Mini) A three-tier mini lantern with soft ribbed walls that glow warmly over an LED tea light.   Size: about 10 cm (4 in) tall and 7.5 cm (3 in) wide   What’s included Ready-to-print 3MF with one plate per part, settings already configured You’ll need Bambu Lab PLA Matte in Bone White, Charcoal and Terracotta (any similar matte PLA works) An LED tea light, 38–43 mm (1.5–1.7 in) wide. Never use a real flame. Finishing Magnets (optional): press 2 magnets into the pockets in the shade and 2 into the base. Check the polarity first so they attract, then fix each with a small dab of superglue. Handle: cut a piece of black  filament. Bend it into an arch (a little warmth from a hair dryer makes it easier) and glue the ends into the two small holes at the top. Light it: set an LED tea light in the base and place the shade on top. More from Lantern Studies Finished, hand-patterned lamps are released in limited drops. Follow @tangent.objects on Instagram for the next one.