SVEINS Ridgeline Gather Bag

SVEINS Ridgeline Gather Bag ABOUT RIDGELINE Ridgeline is a multicolor, flexible FDM 3D-printed bag from the SVEINS series created by independent designer ricky.svg and designed specifically for the Bambu Lab H3C.   Ridgeline turns the gathered folds of a drawstring bag into sculpted ridges. The cord-and-pleat system serves both as a defining design feature and a new way to cinch the bag closed. The TPU body combines an internal support, a mesh inner layer, and anti-tear components to balance softness and structure. Use 3 mm cord or 2.85 mm filament as the drawstring. Thread it through the cord guides, fit a cord lock, and pull to gather the folds and adjust the opening.   Ridgeline currently comes in three recommended colorways: Tundra Green, Desert Yellow, and Original Desert Yellow.    Ridgeline currently comes in three recommended colorways: Tundra Green, Desert Yellow, and Original Desert Yellow. Tundra Green requires one nozzle configured for 2.85 mm filament, while Desert Yellow and Original Desert Yellow each require two.    You can also mix and match TPU colors to suit your preferences.   TUNDRA GREEN Fresh greens with a bold, sporty edge. A little outdoor energy for your everyday carry. ORIGINAL DESERT YELLOW Warm yellow with a flash of blue. A bold take on retro outdoor style.   PRINTING & USAGE NOTES Printer & Materials Ridgeline is designed for the Bambu Lab H3C and uses multiple TPU colors and hardness levels across different sections. The outer panels, mesh inner layer, anti-tear components, and cord guides have separate material assignments, so the number of main colors may differ from the number of material slots in the print profile. Before printing, check each part’s filament assignment, hardness, and feeding configuration in Bambu Studio. When customizing colors, retain the material properties required by each structural section. Flexible TPU requires careful preparation, especially softer materials such as TPU 75A. Feeding, retraction, and extrusion can be more challenging than with rigid filaments. Thoroughly dry your filament, confirm that your printer and feeding setup support the selected TPU, and adjust print speeds and settings as needed to reduce feeding issues, clogs, and surface defects.   Straps & Drawstrings Ridgeline supports customizable straps and drawstrings. Choose your preferred strap material, color, and length. The matching 3D-printed shoulder strap is still being refined, so the strap setup shown in the photos is not included as a complete kit in the current download. Use 3 mm diameter cord or 2.85 mm TPU 75A filament as drawstrings on both sides of the bag opening. Thread them through the cord guides and fit cord locks, then pull the drawstrings to adjust and secure the opening.   Boost MeWelcome to download and print SVEINS Ridgeline You are also more than welcome to share your print results and any feedback or suggestions.And please allow me to share my crowdfunding project as well. It is compatible with any 3D printer capable of printing TPU and with a build volume of at least 25 × 25 × 25 cm, making it accessible to more makers and allowing more people to experience the design. https://makerworld.com/zh/crowdfunding/174-scripts-bag-series-sveins