Flexi Tiger - 4 & 3-Color & White Tiger Versions

Meet the Flexi Tiger—a large, highly articulated tiger with an expressive face, a long flexible body and an equally flexible striped tail.   The many articulated sections allow the tiger to bend, curl, arch and drape into a wide variety of poses. Its substantial size gives it a satisfying feel in your hands, making it equally enjoyable as a display model, desk pet or oversized fidget toy. Three Color Versions Three print profiles are included: • 4-color tiger — orange, white, black and pink   • 3-color tiger — orange, white and black   • 2-color White Tiger — black and white     The 4-color version adds a pink nose and toe beans for a little extra personality. The 3-color version retains the classic orange tiger appearance with one fewer color, while the black-and-white version creates a striking White Tiger variation. This Is a Long Print This is a large and detailed model, and all those stripes require a considerable number of color changes. In other words: this tiger may be flexible, but its printing schedule is not.   Please check the estimated print time and filament requirements in Bambu Studio before beginning. Make sure you have enough filament available and allow plenty of time for the print to finish. Good Bed Adhesion Is Essential The model contains many individual articulated sections, all of which must remain securely attached to the build plate throughout a long print. A clean build plate and a reliable first layer are extremely important.   Before printing: • Thoroughly clean the build plate   • Avoid touching the printing surface after cleaning   • Carefully inspect the first layer   • Confirm that every small section has adhered properly before leaving the printer unattended     Bambu Lab’s Textured PEI Plate cleaning guide explains the recommended cleaning process: https://wiki.bambulab.com/en/filament-acc/acc/pei-plate-clean-guide   I have also had good results using Black Magic 3D Build Plate Adhesive, available on Amazon.com. Build-plate adhesive is optional, but it can provide some additional peace of mind for a print this long. Follow the product instructions and confirm that it is suitable for your build plate. Print Features • Large, highly articulated model   • Three color options included   • Classic orange and White Tiger versions   • Flexible body, legs and tail   • Prints without supports   • Great as a desk pet, display model or fidget toy    Choose the full 4-color tiger for maximum detail, the 3-color version for a classic striped appearance, or the dramatic black-and-white White Tiger. Whichever one you print, clear some room on the build plate—and on your desk. This is a fairly large cat.