Winter Windshield Wiper Protector

Boost Me Winter Windshield Wiper Protector ❄️🚗 Stop your wiper blades from freezing to the windshield overnight without needing to fold them up! On many modern cars, wipers cannot be raised without activating "service mode" first — these small protectors solve that problem effortlessly. Simply place them under your wiper arms when parking in icy or snowy weather to keep the rubber blades slightly lifted off the glass. 💡 Key Features Prevents Frozen Wipers: Keeps the rubber off the cold windshield glass. No Service Mode Needed: Avoids the hassle of putting your wipers into service position every night. Asymmetric Design: Includes two heights — a taller protector for the driver's side and a shorter protector for the passenger's side to account for typical wiper arm angles. High-Visibility Reminder: Highly recommended to print in bright/vivid colors (like bright orange, neon yellow, or green) so you easily spot and remove them before driving off! 🖨️ Recommended Print Settings Layer Height: 0.2 mm Wall Loops / Walls: 3 Infill: Gyroid (10% is sufficient) Supports: Not required 🧵 Material Compatibility The included print profiles are prepared and tested for a wide range of filaments: PLA (Great for quick daylight use, but store away from direct hot summer sun) PETG (Recommended for better outdoor durability and temperature resistance) TPU (Flexible, extra soft on glass and paint) ABS / ASA (Maximum weather and UV resistance) 📦 What to Print Print 1x Driver Side (Taller) and 1x Passenger Side (Shorter).   Try also  Ultimate Ice scraper forms around windshield https://makerworld.com/en/models/2034160-ultimate-ice-scraper-forms-around-windshield#profileId-2193988