X1 Modular suppressor for 22LR

X1 Modular suppress with various lengths and types of baffles by Hickamfield      Print in PA6-CF or better for best results I was tired of baffles blowing out so here is a suppressor that you can change out the baffles if they blow out or deuterate   There are options for 1, 2, 3, 4, or 5 baffles, with two different baffle types I have found that type A gives you a better sound quality   You will need a standard thread adaptor 1/2x 28 to 3/4x 16  This is rated for .22LR  and is flow through design  Print with 8 walls and 100% concentric infill it will work with PLA + but you know best  Load in spacer first then if using baffle A load in more pointed side in first (side pointed up on print plate) with no need to align holes.  If using baffle B load in with vent holes lining up.  If using a combination load in A then B and repeat  Have fun be safe