Silent 3-in-1 Fidget Toy (Print in Place)

This Silent 3-in-1 Fidget Toy combines three different fidgets in one compact design, and none of them make a sound. On one end, a ring spins freely inside its housing, big enough to slip your finger through. On the other end, a heptagon spins inside the body with a ball locked into its center, so you can roll the ball under your thumb or spin the heptagon around it. Each joint is designed to move smoothly, so you can fidget in class, at work, or anywhere quiet. It’s fully print-in-place, so it comes off the build plate ready to use with zero supports and zero assembly. Ribbed edges on both ends give your fingers a solid grip, and a recessed hourglass panel across the middle finishes off the design. At only 9.91 grams and under 29 minutes of print time, this is the perfect print for anyone who loves a good fidget they can use without making a sound. Boost MeIf you like this model, please consider boosting it! It helps out a ton :)MembershipWant to sell my 3D printed fidget toys? Become part of my Commercial License Membership program!Printing Instructions: Prepare the Print BedClean the print bed thoroughly with isopropyl alcohol to ensure proper adhesion. Additional adhesive for the print bed is highly recommended! I suggest using 3D-Lac spray or a glue stick.   Download the Print ProfileSend the pre-configured print profile to your Bambu Lab printer through the Bambu Handy app or Download and open the pre-configured print profile in Bambu Studio.   Select Your Printing OptionsChoose your filament type and color. Select your print bed type (e.g., textured or smooth). Confirm your printer settings, ideally for a Bambu Lab printer.   Start PrintingBegin the print job. No supports are necessary.