iPhone Duo Stand – Folded & Open | Case Compatible

iPhone Duo Stand – Folded & Open | Case Compatible A minimalist, 3D-printable desktop stand designed specifically for the foldable iPhone Duo, with three versions to accommodate the phone folded, folded with a case, or fully opened. Based on my original phone stand design, this version has been adapted for the Duo's different configurations while maintaining a clean, compact footprint and a stable viewing angle. Three Versions Included 1. Folded – No Case Designed for the Duo in its folded configuration without a protective case. Features a narrower holding slot for a closer fit. 2. Folded – With Case The same stand design with a wider holding slot to accommodate a protective case. Actual fit may vary depending on case thickness. 3. Open – Portrait & Landscape Features a thinner holding slot designed for the Duo when unfolded. Supports both portrait and landscape positioning, making it useful for widgets, calendars, videos, and general desktop use. Swipe-Up Gesture Access Each stand includes a small cutout in the front retaining lip, providing access to the bottom of the display. This allows you to swipe up for Home and other bottom-edge gestures without having to remove the phone from the stand. Designed for Clean, Support-Free Printing The stand is intentionally printed on its side, with the swipe-gesture cutout facing upward. This orientation eliminates the need for supports and produces clean exterior surfaces without prominent horizontal layer lines. Important: Do not change the provided print orientation. The models are positioned specifically for support-free printing and the best surface finish. Printing them upright or in another orientation may require supports and negatively affect the finished appearance. The included print profiles have top-surface ironing enabled for an even smoother finish on the upward-facing side. Ironing is entirely optional and can be disabled in Bambu Studio before printing to reduce print time. Features Three versions for folded and unfolded configurations Dedicated options for use with or without a case Portrait and landscape support when unfolded Front cutout for easy swipe-up gestures Optimized side-print orientation Support-free printing Optional ironing for a smoother finish Compact, minimalist design No assembly or additional hardware required Printing Recommendations Material: PLA (tested); PETG should also work but has not been tested Layer height: 0.20 mm Supports: Not required Orientation: Keep the provided orientation - on its side with the swipe cutout facing upward Ironing: Enabled in the included profiles; optional Assembly: None Compatibility Notes Designed specifically around the iPhone Duo's folded and unfolded configurations. Choose the appropriate version based on how you intend to use the phone. For the case-compatible version, check the thickness of your case before printing, as cases vary in size. Installation No assembly required. Simply place the stand on a flat surface and insert your phone into the corresponding slot. If you enjoy this design, please consider leaving a rating, sharing a photo of your print, or boosting the model!   Related Designs Looking for a stand for a regular smartphone? Check out my Original Phone Stand, featuring the same clean, minimalist design for everyday use.   Boost MeLike this design? A boost helps it reach more makers and supports the time I put into designing, printing, and testing new models. If you find it useful, I'd really appreciate the support. Thanks for helping me keep creating!MembershipEnjoying my designs? Consider subscribing to support future projects and get notified when I release something new. Your support helps me continue designing, testing, and sharing practical 3D prints. Thanks for being part of it!