Brewers 2026 World Series Floating Logo Sign v3

Milwaukee Brewers 2026 World Series Champions Floating Logo Sign Assembly Difficulty: Medium Filament Used: Giantarm Matte Blue PLA, Elegoo Rapid PLA+ Yellow, ESun Fire Engine Red PLA+, Bambu Jade White PLA   Boost MeIf you enjoy these signs or have given them as gifts, please consider dropping a boost!  Floating Logo Signs are back! Version 3 includes rounded corners on the base, a simpler slide-in kickstand, and a new self-leveling hanging attachment.    Display your favorite teams in style. All signs are designed as multiple pieces, allowing the use of any 3D printer, without the need of a multi-material system, while providing a dynamic, three dimensional look. They are also fun to assemble, with all* the parts snapping together with tight tolerances. All files are 3MF, and if using Bambu/Orca slicers, are laid out, colored, and ready to print. These make excellent gifts!   These signs can be displayed 4 ways: Hanging on the wall using a nail or the provided hanger (the hanger is useful if moving the signs often (standings board) as they will self level the sign when hung). If you choose this display method, you can use one of these two options to stand off the logo from the main base:3D printed rods  TPU adapters and cut down acrylic rods. This method is much more work and requires additional tools, but it results in a very clean look.  On a desk or shelf using the provided insertable kickstand. If you choose this display method, you can use one of the two standoff rods:3D printed rods  TPU adapters and cut down acrylic rods. This method is much more work and required additional tools, but it results in a very clean look.  On a metal surface (toolbox, refrigerator, etc) using these inserts. NOTE: if displaying this way, you do NOT need to print the main base, kickstand, or hanger. On a corkboard or fabric cubicle wall using these inserts. NOTE: these are designed to use traditional thumbtacks. NOTE: if displaying this way, you do NOT need to print the main base, kickstand, or hanger.   Benefits to this design-   No AMS/Multi Material system is required to print any of my signs. All forward facing parts can be printed face down, allowing the texture of the build plate to be visible. These are designed with different layers at different heights, so you get a unique 3 dimensional look.   Assembly   Easy: No tools or glue required- all parts should snap into place with friction.  Medium: May require small amounts of CA glue and/or tweezers for assembly. Hard: Many small pieces that WILL require CA glue, tweezers, and patience! Still very fun to assemble and rewarding when complete!   Tips   Most components should be able to be assembled using the tight tolerances only of the press fit pins and sockets, however there may be some small pieces (logo dependent) that might require manual placement and/or CA glue. Use parallel jaw pliers to press smaller/stubborn pieces in.