Organic Christmas Tree Lanterns for LED Tea Lights

Four glowing Christmas trees with organic shapes that you simply place over an LED tea light. Hundreds of small light holes scatter dots, stars and drops around the room, while the thin wall glows warmly as well. The four variants Spiral: soft cone with a raised, gently waving string of lights and stars in between (204 holes) Branches: drooping, wavy tiers of branches with soft folds at the bottom, diamonds and dots (131 holes) Swirl: twisted lobes like a flame, the tip leans slightly to one side, leaves and light strings in the folds (252 holes) Scales: overlapping scales like a pine cone, with a drop-shaped hole in every scale (178 holes) Dimensions Height: 150 mm Base diameter: 92 to 100 mm, depending on the variant Opening in the base ring: Ø 64 mm Inside clearance: at least Ø 66 mm up to 36 mm height. Large LED tea lights up to Ø 64 mm and about 36 mm tall (including the flame) fit inside, standard LED tea lights (Ø 38 mm) fit easily. Wall thickness: 2 mm Printing Print upright on the base ring, no supports. The undersides of the tiers and scales are angled at about 45°, and the light holes are small or come to a point at the top. White or natural PLA so the wall lets the light through Layer height 0.2 mm 5 wall loops or 100 % infill, so the 2 mm wall is solid and glows evenly About 65 to 80 g of filament per tree Also fits the A1 mini Important Use with LED tea lights only, never with real candles. PLA softens at around 60 °C and is flammable. About the design The trees were designed in Blender. The wall has the same thickness everywhere so each tree glows evenly, and the holes only sit where the wall is smooth and thin. I'd love to see photos of your prints in the comments!