Capsule 32 mm, screw together - Capsule Machine

Screw-together capsule for gumball and capsule machines, party favors, gifts, bingo or lottery balls. Two parts (male and female half) close with a right-hand thread. SPECS - Diameter: 32 mm, wall thickness 1.6 mm - Thread: pitch 2.0 mm, depth 0.6 mm, 0.3 mm clearance - Part A: male half (thread outside), Part B: female half (thread inside) PRINTING - No supports needed: print A with the collar down, B with the rim down (both STLs are already oriented) - Layer height 0.12-0.16 mm, 3 walls - PLA or PETG, transparent PETG gives the classic capsule look NOTES - If the thread is too tight or too loose, scale the halves slightly in your slicer. - The halves are not watertight, so do not use them for liquids or food. Aufschraubbare Kugel (32 mm) für Kapsel- und Kugelautomaten, Partygeschenke und Bingo. Zwei Hälften mit Rechtsgewinde, Druck ohne Stützen (A mit Kragen nach unten, B mit Rand nach unten).