Square Flip & Twist Fidget – Print in Place

The Square Infinity Flip & Twist Fidget combines two satisfying movements in one compact print-in-place design. Flip one square over the other for a continuous folding motion, or twist the connected sections to explore even more ways to move and reshape the fidget.    The two squares can repeatedly trade places without reaching an end, creating a simple movement that is easy to use but difficult to put down. Every joint was carefully tuned to rotate smoothly while keeping both sections securely connected during use.    The rounded corners and recessed details give the model a clean appearance and make it comfortable to operate with one hand. The entire mechanism is fully print-in-place, coming off the build plate ready to use with no assembly or supports required.    Taking less than 27 minutes to print and using under 11 grams of filament, the Square Infinity Flip & Twist Fidget is a fast, affordable print for anyone who enjoys repetitive motion, transforming mechanisms, or compact everyday fidgets. Boost Me (for free) Boost MeIf you like this model, please consider boosting it! It helps out a ton :)Printing Instructions Open the Print Profile Download and open the included print profile in Bambu Studio, or send it directly to your printer through the Bambu Handy app. Prepare and Check Everything Select the correct printer, build plate, filament type, and colours. Clean the plate before printing: Textured PEI Plate: Wash it with warm water and dish soap, rinse thoroughly, and dry it with a clean, lint-free cloth. Cool Plate: Wipe it with isopropyl alcohol and a clean, lint-free cloth. Let it dry completely before printing. Avoid touching the printing surface after cleaning it. Start Printing Review the settings, slice the model if needed, and send it to your printer. For the best results, use the provided print profile without changing the recommended settings.