Thermoformed Kawaii Christmas Tree

Boost MeIf you enjoy this model, please consider giving it a Boost. It helps me out a lot and keeps new designs coming. Thank you!A happy little Christmas tree in a red pot, and you can fill it with candy! Hang it on the big Christmas tree, put it on the table or give it away as a sweet gift. Size: 55 × 76 × 36 mm (without the hanging loop). Part of my Christmas collection. Also see Thermoformed Snowman, Thermoformed Santa Hat, Thermoformed Christmas Elves, Thermoformed Peppermint Candy, Thermoformed Christmas Teddy Bear, Thermoformed Christmas Penguin, Thermoformed Christmas Present, Thermoformed Winter Fox, Thermoformed Gingerbread House, Thermoformed Hot Cocoa Cup, Thermoformed Kawaii Dumpling, Thermoformed Nordic Christmas Bauble, Thermoformed Kawaii Gingerbread Man, Thermoformed Christmas Gnome. What's included Plate 1, molds (print once): bottom mold and top mold (plug). Plate 2, plain tree (1 color): two flat nets, nut with hanging loop and clip. No AMS needed. Plate 3, kawaii Christmas tree (4 colors, AMS): a cute face with big eyes, a smile and rosy cheeks, cream baubles, a cream star on top and a red pot. On the back: cream bead garlands wound around the tree, red baubles, the cream star and the red pot. Print info Ready-to-print 3MF with all settings included. Works on any printer (0.4 mm nozzle, 0.20 mm layers). Max 4 colors per plate, so it fits any 4-slot AMS or 4-color printer. Material: PLA. Molds in any color (I use black). The tree in green, with cream for the baubles, star and garlands, red for the cheeks, pot, back baubles and hanger, and black for the face. Molds: approx. 53 g, 1 h 21 min. Plain tree: approx. 7 g, 26 min. With details: approx. 10 g, 41 min. (Print times vary by printer.) The nets are printed as an open gyroid mesh: 0 top and 0 bottom layers, 2 walls, 30 % gyroid infill. The details are printed on top of the net (0 walls, 70 % infill). How to make it Print the molds once. (I use PLA and it works great) Print a set of nets, the nut and the clip (plate 2 or 3). Place a flat net in the bottom mold with the raised rim facing down into the groove. Heat the net with a hair dryer for about 8 to 10 seconds until it is soft. (Be quick) Press the top mold down firmly and hold it until the net has cooled. Remove the formed half. Repeat with the second net, so you have a front and a back. Fill with candy, put the two halves together with the flat sides facing each other, and screw the nut onto the stem on the tip of the tree (the red nut is the tree topper). Push the clip over the strip at the bottom to lock the halves together. Hang it on the tree or hand it out! Tips Small chocolates and wrapped candies fit perfectly. A sweet advent or table gift. No AMS? Print plate 2 in green. It still looks lovely as a simple tree ornament. Print a few in different greens and make a little forest on the table.