Haku Dragon Diorama (Spirited Away)

Bring the magic of Studio Ghibli’s Spirited Away (Sen to Chihiro no Kamikakushi) to your desk or shelf with this detailed sculpture of Haku in his iconic dragon form. Coiling dynamically around a dark swirling water vortex crested with white foam, this model captures the fluid movement, intricate scales, and mystical presence of the Kohaku River Spirit. Designed to look stunning with Matte PLA filaments, the contrast between the deep navy water base, crisp white scales, cream belly/antlers, and vibrant turquoise mane makes it a true centerpiece right off the build plate. ⚙️ Print Profile & Recommended Settings Printer Compatibility: Optimized for Bambu Lab printers (X1C, P1S, P1P, A1, A1 Mini) with AMS. Filament Material: Matte PLA recommended to hide layer lines and achieve a soft, studio-grade finish. Colors Used (4-Color Print):⚪ Matte White: Body scales, face, claws, and wave foam. 🔵 Matte Turquoise / Teal Blue: Flowing mane, whiskers, snout bridge, and tail tip. 🍦 Matte Cream / Bone White: Underbelly plates, horns/antlers, and inner ears. 🌌 Matte Dark Blue / Navy: Swirling water vortex base. Nozzle Size: 0.4 mm Layer Height: 0.16 mm (High Quality / Optimal for scale details) or 0.12 mm (Fine Detail). Wall Loops: 2-3 walls for strong thin features (whiskers and horns). Infill: 10% – 15% Gyroid. Supports: Yes – Tree Supports (Auto / Organic) on build plate (and critical overhangs). Pay special attention to the whiskers, claws, chin, and lower body curves. Tip: Remove supports carefully around the whiskers and antlers! Brim: Outer brim (5 mm) recommended for secure bed adhesion. Prime Tower: Enabled (for multi-color AMS printing). 💬 Share Your Makes! If you enjoy this model, please leave a Like, Boost 🚀, and post a photo of your print in the comments! Seeing your color combinations and setups helps support future designs.