Princess Jasmine

Princess Jasmine   Another user request; An elegant figurine inspired by Jasmine from Alladin. A detailed figurine. This model captures the charm, kindness, and classic beauty of the beloved princess. With refined details and a timeless silhouette, it’s a perfect collectible for fans of fairy tales and iconic characters. Ideal for display as a delicate and decorative piece. Another request brought to life with care and attention to detail.   Printed in parts, NO AMS needed, just some time and some glue. Eyes can be a little fiddly, but if i can do it with my big fingers, so can you. Just assemble them first them position as one unit and push in. Same rough size as Rapunzel, Belle, Tiana, Mulan and Arie on my page so will stand together and not look odd.    AMS options available in the print profile selection.   📌 Recommended printing settings: Material: PLA Layer height: 0.16 mm Infill: 15% Nozzle: 0.4mm supports where nessesary - I have tried to make it so all have a surface contacting the plate however due to the detail and complexity of the modeling they sometimes require alot of support, so be aware and be carefull during support removal. Use a naked flame gentley and for short intervals to clean surfaces after removal   Assembly – Recommended Method on multipart models Dry fit: Assemble all parts without glue to check alignment and fit. Cleanup: Lightly deburr edges and pegs where nessesary with a file/modeling tool to ensure uniform contact. All parts are tested and fit together. Optional fix: Use glue for permanent assembly.