Nightwing Escrima Holder

Nightwing Escrima Holder/Backpack for carrying or displaying my custom escrima sticks   Photo model printed in ERYONE Silk Blue   The clamps are designed to be strong, but I would advise against repeatedly removing and replacing the sticks. The plastic could weaken over time from the flex of this action, or worse, layers could snap and ruin the grip. The grip will not weaken over time while the escrima are sitting on display.  The escrima can and should be removed, as this was designed to be a backpack to carry them around, the warning is just more so something to be aware of.   The gaps were designed to be used with generic polyester pull tape and are approximately 14mm wide and 2mm tall, though it could also be mounted using small nails or hooks The supports at the top of the model where the rope passes through are very annoying to remove; I used a small flathead screwdriver and pried them out, pulling the back in about 5 minutes. If you want to avoid this, I have included a file that omits supports in that area, though it is a riskier print.