Ribbed Christmas Baubles - LED Tea Light Holder

Two ribbed Christmas baubles that hold an LED tea light, in a calm Japandi style. Open bauble (Ø66 mm): a wide round opening facing forward. Classic bauble (Ø70 mm): tilted like a real ornament resting on the table, with the opening on top. Drop in a standard LED tea light (Ø38 mm) and the warm light shines through the opening. Why you'll love printing it NO SUPPORTS NEEDED: designed and tested to print without any supports, both the baubles and the caps. NO AMS NEEDED: bauble and cap are separate parts, one color each. The cap pushes onto a small peg on top of the bauble. A drop of glue makes it permanent. ⚠ LED TEA LIGHTS ONLY. PLA softens at 55–60 °C: never use a real flame. Print settings (tested on Bambu Lab A1) These are the exact settings in the print profile, for both baubles and caps: Layer height: 0.16 mm Walls: 2 Infill: 15% Supports: OFF (not needed) Filament: PLA. PLA Matte gives the baubles a ceramic look; PLA Silk looks great on the caps. Tip: on the A1 a small outer brim helps the baubles stay put on the bed. Print time: about 2 h 45 min (open bauble) and 3 h 20 min (classic bauble), about 20 min per cap. Assembly Push the cap onto the peg, then place an LED tea light inside. Merry Christmas and happy printing!