Paper-Style Christmas Tree Set Faceted & Scalloped

Bring the look of folded paper Christmas decor to your 3D printer! This set includes two trees in different sizes, modeled after handmade paper trees. They have crisp folded facets, rounded scalloped edges and five evenly stacked sections, topped with a softly rounded tip.   Both trees fit on a single plate, print standing upright and need no supports.   What’s included Large tree: 150 mm tall, about 65 mm wide at the base Small tree: 90 mm tall, about 39 mm wide at the base (the same design at 60 %) Both trees arranged on one plate, ready to print   Features Faceted “folded paper” panels with scalloped edges on every layer 5 evenly spaced sections: a pointed top plus 4 tiers Scallops are offset from tier to tier for a natural layered look Rounded tip, so there’s no fragile needle point Solid single-piece trees with clean, watertight meshes Wide flat base   Print profile Layer height: 0.20 mm Walls: 2 Infill: 5 % (adaptive cubic) Supports: none Material: PLA   For even crisper scallops, try 0.12–0.16 mm layers. Matte PLA gives the most paper-like finish.   Why no supports? Every scalloped edge has a hidden chamfer underneath that blends into the tier below. The steepest overhang on the whole model is about 40°, so every layer rests on the one below it.   Tips Print the trees in different colors, like dark green, sage, mustard yellow and white, and group them into a little forest. Want more sizes? Just scale them. The overhang angles stay the same at any size, so they stay support-free. At very small sizes the scallops lose some detail.   Designed in Blender. Happy printing and Merry Christmas! 🎄