Tesla Roadster + Launch Ramp Magnetic Display

High Quality Print Profile 🧲 Magnetic Tesla Roadster With Launch Ramp (Please read "assembly" below, before downloading) "23cm Tall"       INTRODUCTION Tesla Roadster, inspired by one of the most futuristic cars out there today Sharp lines, smooth body shape, and small scale, I made sure  i redesign it to be 3d print friendly and at the highest quality possible Added a double magnet mount underneath, so it can stick to your fridge, locker, or any metal surface  And depending on where you place it, it can look like it's driving sideways or upside down looking like it's defying gravity!             ASSEMBLY #1 Magnets Height: 10mm Depth: 3mm I made the magnet mount underneath the car and on the ramp replacable, editable for people who would like to use a different type/shape of magnets You can easily change it by using a computer and any slicer.   #2 Rear and Front Wheels Be carefull, u need to attach the right wheel on the right spot of the car 2 of the wheels are bigger and wider those are the rear wheels and the smaller scale wheels are the front ones   #3 Glue Required Glue required mostly to keep the magnets in place                   Happy Printing!  Enjoy your new Tesla Roadster that can stick on any metal surfaces!