Geometric Soap Dish / Sponge Holder #6

Soap Dish Collection #6 — Geometric & Organic Patterns (Dual-Body + Drain) A set of 10 modern geometric and minimalist soap dishes and sponge holders, bringing dynamic teardrop grids, voronoi structures, bold radial rays, and intricate lattice cutouts into a functional design.   This collection focuses on high-contrast geometry, fluid line work, and modern architectural textures — combining bold cutouts with teardrop drops, classic Seigaiha waves, concentric radial bursts, and organic voronoi drainage inserts.   Each set is available with two body styles: Classic Body — a solid tray that holds and catches all water runoff Drainage Body — features a built-in spout/drain to let excess water flow directly into the sink 📦 What’s in the Print Profiles: Each pattern's print profile includes 3 organized plates: Plate 1: Top pattern insert model Plate 2: Classic body (without drain) Plate 3: Drainage body (with spout) Simply print Plate 1 with your choice of Plate 2 or Plate 3! Why it works: ✔ Bold Geometric Aesthetics — Designed around high-contrast teardrops, voronoi cells, radial rays, and structural lattices ✔ Two body choices — Pick between a sealed classic base or a self-draining spout base ✔ Two-tone printing — Swap filament colors between body and insert for striking contrast ✔ Removable insert — Lifts right out for effortless cleaning under the tap (no soap scum buildup) ✔ Designed for FDM — Optimized for a 0.4mm nozzle, prints cleanly with no supports needed ✔ Material friendly — Works great in PLA, PETG, or ASA 🧩 Assembly & Fit Tip: The insert is designed to drop into the body easily without friction or restriction. However, because the design features rounded lower edges: Facing Orientation: Always make sure to mount the insert with the rounded (filleted) corners facing down into the body tray. Rotation Fit: If the insert feels snug or doesn't sit completely flat right away, simply rotate it 180°. It will drop into place effortlessly once aligned with the natural shape of the body. 💡 Slicer Tip: If using a slicer other than Bambu Studio, enable Arachne wall generation for best results. Ensure cooling is set high for sharp, clean bridging across fine pattern cutouts. Soap Dish / Sponge Holder Collection #1 available here Soap Dish / Sponge Holder Collection #2 available here Soap Dish / Sponge Holder Collection #3 available here Soap Dish / Sponge Holder Collection #4 available here Soap Dish / Sponge Holder Collection #5 available here   Supported by PCBWay — offering professional 3D printing, sheet metal, CNC, and PCB manufacturing for makers: https://www.pcbway.com/rapid-prototyping/3d-printing/