AutoGrip – Self-Tightening Panel Carrier

AutoGrip – Self-Tightening Panel Carrier The heavier the load, the stronger the grip! 💪 AutoGrip is a simple and practical 3D-printable tool that makes carrying flat panels and boards easier. Thanks to its self-tightening mechanism, the grip automatically increases with the weight of the panel. No manual tightening needed! Perfect for carrying wooden boards, plywood, MDF, and other flat materials. 🔩 Hardware Required 6× M4 screws (20 mm or longer) Anti-slip grip tape (coarse, sandpaper-like tape recommended) I used coarse Parkside anti-slip tape with a gritty surface, and it works great! 🔧 Assembly Print all the parts. Assemble them using the six M4 screws. Apply anti-slip grip tape to the surfaces that come into contact with the panel.     ⚠️ Safety: Always test the grip before lifting heavier panels. Make sure the grip tape is firmly attached and the panel is securely held. Rough grip tape may leave marks on delicate surfaces.   💬 If you like this model, consider leaving a boost! 🚀 Happy printing! TIMakes