Pyro Gas Mask

Another Cosmetic, kinda. The Pyro Gas Mask! Simple Model to assemble, requires 2 5x10x2mm rectangular magnets to connect the 2 halves for easier wearer.  (I know it looks kinda bad on the sides, I was testing out Siraya Tech Foaming TPU and didnt think of using contact glue, i apologize) Glue is required. There are 5 profiles. 3 are all different versions of the main mask. Either in small pieces (Option used in pictures), 4 main pieces, or the 2 full halves. A profile with the sizing ring. The final profile is ONLY for sizing. It will include the FULL mask (without the extra bits) for scaling using whatever program you use to scale helmets. The lenses used are 94mm diameter, 3mm thick tinted acrylic bought at a laser shop. The standard profiles include the lenses aswell, to either be printed or used as references for cutting. The lenses are CIRCLES so you can cheaply order cut acrylic/PETG or other clear material. The max thickness is about ~3mm that can fit.   !!CAUTION!! KEEP IN MIND. SIZES CHANGE WHEN SCALING. SCALING THIS MODEL DOWN (I DO NOT RECOMMEND UNLESS YOU KNOW WHAT YOU ARE DOING) WILL MAKE THE SIZES OF THE MAGNET HOLES SMALLER THAN THE SPECIFIED ONES. SAME FOR THE LENSES. BE SURE TO SCALE EVERYTHING WHEN SCALING. AND DOUBLE CHECK EVERYTHING. WASTING FILAMENT BECAUSE OF THIS IS NOT FUN.   Okay now some general stuff. I will be working on making instructions and cleaning up descriptions on already existing and uploaded models as the requests for them seem higher than expected. Generally it should be noted if a part doesnt fit, its likely wrong. But allas, thats not how the tide flows for everyone. DOes that mean no models for a while? No not really? I have a few models (starting with this one) that O have finished a while or not long ago. Only reason to uploading now is because I didn't have any pictures of them yet. So you will see around 10 or so models be uploaded sooner or later. Afterwards progress may slow down as I begin on new projects. I am also attending university so that can hinder progress aswell. Again, dont ask “please do ___ next!” It's either done but not tested, in progress, or not planned yet. (This only goes for all Team Fortress 2 Models.)    QnA Q: Part does't fit! A: Make sure your printer is calibrated. All parts usually have a minimum tolerance of .2mm. If your printer is not calibrated or not using the correct settings, part sizes can differ ever so slightly. Be sure to print test parts like a XYZ cube. Dialing in filament settings is also a factor. This can differ when a model is scaled. Different filament types and brands can also cause these differences. Q: Will you make ___ next? A: It'll be done when its made. Q: My print failed A: Clean your print bed, use soapy water to clean it, or isopropanol alcohol to clean it. Apply glue or use a cool plate. If the print still fails, apply a brim or make said brim bigger. Use more supports if necessary. If all fails slow down the print speed. Q:File is missing X part A:Makerworld has issues with downloading certain parts from the 3mf when using the download stl button. This is because of the naming of some parts. I can prevent this prematurely but I am still human and can make mistakes. I will try my best to offer a .zip file with all the parts in stl format.  If the 3mf itself is missing a part, please notify me to allow me to fix it as fast as I can. Boost MeHmph!MembershipHave a cosplay prop shop and want to sell 3d prints of my models? Consider checking out the subscriptions!