FTN.6 9mm PCC Suppressor

This is the FTN.5 PCC model with a FTN.6 reskin. This model is made for 9mm PCCs. If you put this on a 9mm handgun it will not chamber the next round, it is not intended for handgun use. Fixed barrel PCCs only, unless you want a “bolt action” glock per say. This model can be found on the Sea by PLABoi. This model requires a ½-28 to ¾-16 thread adapter, you can get them on amazon for like 12 dollars. Amazon.com : 1/2 28 to 3/4 16.  There is also a printed on Maker World while you wait for the metal one to come. I recommend epoxying the adapter in the can. Here is the JB weld I use. Amazon.com: J-B Weld 50165 25ml Epoxy Syringe, Plain : Industrial & Scientific     Only PLA+ for limited use or PPA-CF and Nylon filaments such as PA6-CF, PA6-GF, PA12-CF, and PA12-GF. ABSOLUTLEY NO PLA, PETG, ABS, or anything not listed. File and settings are set up and good to go using 300blkFDE's PA6-CF settings. It is preoriented and already has a brim, no supports are needed for this model. If you have any issues with print falling during print you can increase brim size. Do not increase print speed, this needs to be made slowly to be strong.   Follow all federal, state, and local laws. I am not responsible for what you create and where you create it do your own research. Use at your own discretion.