Pokemon #255 - Torchic Kit Card

Bring the magic of Pokémon to life with this Torchic kit card!   This model prints flat and transforms into a fully assembled ~70mm display figurine of Torchic that can stand on its own. Simply print, pop the pieces out, and assemble.   Features: Compact, print-in-place style kit card Cleanly separated parts for easy removal Designed for FDM 3D printing Beginner-friendly assembly Accurate proportions inspired by the classic Pokémon design Printing Notes: This kit card requires an AMS. Ensure the print bed is clean before printing. Let the print bed cool completely before removing the print. Removing early may warp the piece. While it may be possible to print a smaller or larger version, tolerances have not been tested for other sizes, so print at your own risk! Assembly Notes: There are a grand total of 13 pieces. The small connectors are all throwaways The back piece has an F on the side thtat points towards the front of the body. The legs have an L, R label on the side that point towards the inside of the body. The toes have an LR, LL, RL, RR label on the side that points towards the leg The toe connector pieces have a small indentation on the side that points towards the tail. Some of these pieces can be a little fragile due to their size. For better results, use a flush cutter when trimming and clean up with a knife Assembly GIF below, though hopefully most pieces are self explanatory!