Michael Myers Toilet Paper Holder - Halloween

HE WATCHES. HE WAITS. HE WIPES. 🔪🧻💀 Havin' a SPOOKY 👻 POOPY 💩 after Taco 🌮 Tuesday??? Michael Myers has your back! Or at least your toilet paper. 😂 Introducing the ultimate Halloween bathroom accessory! This functional Michael Myers toilet paper holder features a detailed horror-inspired figure, a creepy jack-o'-lantern, weathered fencing, autumn leaves, and a wooden sign reading: HE WATCHES. HE WAITS. Perfect for Halloween decorating, horror fans, or surprising unsuspecting guests when nature calls! "I KNOW WHAT YOU ATE LAST NIGHT." 🌮🤣 🖨️ Printing Information My example was printed on a Bambu Lab H2C with a 0.6 mm H-series nozzle. Filament: Black PLA Nozzle: 0.6 mm as tested; you can adjust for your own printer and desired detail level Infill: Adjustable! Increase the infill if you'd prefer a heavier, more substantial piece Supports: Required for some overhangs, particularly around the arms, hands, and face Assembly: Two main printed sections joined with three hexagonal alignment pins The corrected, physically tested connector dimensions are 8.3 × 8.6 × 12 mm. Test-fit your connectors before permanent assembly. Different printers, filaments, and slicer settings may require minor adjustments. 🧻 Toilet Paper Spindle — Store-Bought! No need to manufacture a toilet paper roller! This design uses a readily available spring-loaded toilet paper spindle, the kind you can purchase from a big-box hardware store or home improvement retailer. For reference, my spindle measures approximately: 155 mm (6.1 inches) overall width 14 mm measured inside diameter Verify your spindle's dimensions and the fit at both ends before purchasing or assembling. Hardware can vary between manufacturers. 🎨 Make It Your Own! Option 1: Antique Metallic Finish My completed model was printed entirely in black PLA and hand-finished with Rub 'n Buff. I applied silver across the model first, followed by copper accents on the hair, wooden signs, fencing, pumpkin, shoes, and autumn leaves. The dark recessed areas remain visible, giving the finished piece an aged, cast-metal appearance. Option 2: Full-Color Hand Painting Print in white PLA and hand-paint Michael with his iconic pale mask, blue coveralls, brown hair, and traditional Halloween colors. Option 3: Print It and Leave It! Prefer the original filament finish? Black, gray, or another color can look great without any post-processing. An AMS is not required for the metallic finish shown in the photographs. All metallic effects were added by hand after printing. 🔧 Assembly and Customization Take your time removing supports, especially around the mask and hands. The model is designed in separate sections for printing and assembly. Check your alignment pins and test the final fit before applying glue. Feel free to experiment with layer heights, nozzle sizes, infill percentages, print settings, and finishing techniques. Make it creepy, make it colorful, make it metallic — get creative! 🎃 Happy Halloween! This project took plenty of printing, experimentation, and finishing, but the result was worth it. And YES — it actually holds toilet paper! 😂 If you make one, please share your photos and print feedback. I'd love to see your versions! HE WATCHES. HE WAITS. HE WIPES. Because every scary poo deserves a little backup. 💩🧻