One-Handed Paper Towel Holder – Easy Roll Changes

One hand. Three everyday tasks made easier. A kitchen paper towel holder designed for easy mounting, straightforward roll changes, and one-handed tearing. When your other hand is busy cooking or cleaning, you can pull and tear a sheet without holding the roll with a second hand. Key features • One-handed tearing for everyday kitchen use. • Easy roll changes when it is time to refill. • Simple mounting to get the holder ready for use. Please check the roll dimensions and mounting instructions below before printing. If you make one, I’d love to see your setup. Please share your paper towel brand and size—your feedback will help improve future versions. Roll compatibility: Fits paper towel rolls 220–280 mm wide with an outer diameter under 160 mm. Assembly Instructions Remove all supports Remove all support material from the printed parts. Optionally, lightly sand the cylindrical shafts on the two small parts for smoother rotation. Avoid excessive sanding, which may loosen the fit. Install the rotating parts Insert one small part into the slot in each body half. Make sure the side with the protruding feature faces outward. Check that both parts rotate freely. If needed, apply a small amount of plastic-compatible lubricant to the shaft contact surfaces. Join the body halves Align and connect the left and right body halves, making sure the joint is fully seated. Mount to the wall Secure the holder to the wall using 3M double-sided mounting tape or screws. For adhesive mounting, clean and dry the surface first, then follow the tape manufacturer’s instructions for pressure and waiting time before use.