Filament spool storage box + silica container V2

Modular filament spool storage system V2 - works with all 1kg spools   This is V2 version of my original spool box system. The system is built from individual stackable boxes designed to store one filament spool each. Every box includes a printable tag slot, so you can clearly label filament type, color or material for easy identification. The box is lightweight but strong.   Parts upgraded in the V2: The box is completely redesigned. Choose if you do or don´t want the hygrometer. From that, both boxes are ready to later add the silica container or the TPU seals. So no reprinting if you decides to add something later. On top of that the box+silica container is now just 226g of PLA. The thread is more smooth. The seals are now easier to use. The silica container is stronger and easier to print. The stands are redesigned to fit the wider V2 boxes. Parts that are the same as the V1: Tags (they now have separate generator HERE) Rack Tag container You can watch the User guide to see how everything works now   Standard box and hygrometer box: When printing lid, make sure to let the plate cool down below 30°C before removing it to avoid any defirmation. The hygrometer box have some supports, make sure to remove them fully for best fitting. I strongly recommend to use the TPU seal with the hygrometer to ensure great seal. The 2 protrusions on the box and the lid should line up. Small missalingments are normal, caused by the printer tolerances. Do not over tighten the lid! Silica container: Can take about 50g of fresh silica Can be instaler do every box   Tags: Editing the tags was real pain, so I made a separate file with generator HERE Or find the original tags porint profile in the V1 HERE   TPU seals: Great add to ensure maximum seal Print from TPU 95A, 90A or 85A. Softer can be fine but I did not tested that.  TPU for AMS is not compatible as it is too hard! TPU likes to leave some excess strings, carefully remove them after printing. The box seal should sit in the orientation it was printed. Watch the User guide to see the right fitment.   Rack: Can be stacked, or connected side to side to store big number of boxes. You can ad TPU legs Stands: Can be connected together There is one for 2 or 1 box Tag containers: Storage for unused tags Choose from 4 options   Links: If you want more universal storage rack that can fit cardboard boxes, check the link HERE   Check the V1 spoolbox HERE   I´ll be very happy to hear your feedback in the comments!😊