Eeveelution Wall Display Hueforge & Frame

⚠️ EDIT: Sylveon is a typo, the print profile has the correct spelling.   🔴 Just a quick note before moving on - I have reduced the size of the Eeveelutions to 99.9% because after printing myself they were quite tight. I would glue these in also! the Eevee in the centre is smaller which is part of the design. 🔵 The Frame (831x246mm) (5 Plates) 🔴 This is a large print, the frame is split onto 5 plates and you will need to print 1 of each plate. You will need to glue the frame together. please give the frame enough time to cool down after printing to avoid warping. 🟡 Frame is 13mm thick 🟡 Added locators and slots to the edges of the frame to help glue them together! (see pictures) 🟡 5 Screw holes for wall fixing (this is quite heavy) (see pictures) 🔵 Vaporeon (90x240mm) 🔴 This Hueforge uses Bambu PLA Basic filament, other brands may not give the same results! 🟡 Print at 100% infill with a layer height of 0.12mm (Not 0.08mm like my other models). and a base layer of 0.16mm 🎨 4 Colour Print   Start with Black At layer #8 (1mm) swap to Dark Gray At layer #13 (1.6mm) swap to Cyan At layer #16 (1.96mm) swap to Jade White for the rest. 🔵 Jolteon (90x240mm) 🔴 This Hueforge uses Bambu PLA Basic filament, other brands may not give the same results! 🟡 Print at 100% infill with a layer height of 0.12mm (Not 0.08mm like my other models). and a base layer of 0.16mm 🎨 4 Colour Print   Start with Black At layer #8 (1mm) swap to Dark Gray At layer #13 (1.6mm) swap to Sunflower Yellow At layer #16 (1.96mm) swap to Jade White for the rest. 🔵 Flareon (90x240mm) 🔴 This Hueforge uses Bambu PLA Basic filament, other brands may not give the same results! 🟡 Print at 100% infill with a layer height of 0.12mm (Not 0.08mm like my other models). and a base layer of 0.16mm 🎨 4 Colour Print   Start with Black At layer #8 (1mm) swap to Dark Gray At layer #13 (1.6mm) swap to Pumpkin Orange At layer #16 (1.96mm) swap to Jade White for the rest. 🔵 Espeon (90x240mm) 🔴 This Hueforge uses Bambu PLA Basic filament, other brands may not give the same results! 🟡 Print at 100% infill with a layer height of 0.12mm (Not 0.08mm like my other models). and a base layer of 0.16mm 🎨 4 Colour Print   Start with Black At layer #8 (1mm) swap to Dark Gray At layer #13 (1.6mm) swap to Purple At layer #16 (1.96mm) swap to Jade White for the rest. 🔵 Eevee (81x240mm) 🔴 This Hueforge uses Bambu PLA Basic filament, other brands may not give the same results! 🟡 Print at 100% infill with a layer height of 0.12mm (Not 0.08mm like my other models). and a base layer of 0.16mm 🎨 4 Colour Print   Start with Black At layer #8 (1mm) swap to Dark Gray At layer #13 (1.6mm) swap to Brown At layer #16 (1.96mm) swap to Jade White for the rest. 🔵 Umbreon (90x240mm) 🔴 This Hueforge uses Bambu PLA Basic filament, other brands may not give the same results! 🟡 Print at 100% infill with a layer height of 0.12mm (Not 0.08mm like my other models). and a base layer of 0.16mm 🎨 4 Colour Print   Start with Black At layer #8 (1mm) swap to Dark Gray At layer #13 (1.6mm) swap to Gray At layer #16 (1.96mm) swap to Jade White for the rest. 🔵 Leafeon (90x240mm) 🔴 This Hueforge uses Bambu PLA Basic filament, other brands may not give the same results! 🟡 Print at 100% infill with a layer height of 0.12mm (Not 0.08mm like my other models). and a base layer of 0.16mm 🎨 4 Colour Print   Start with Black At layer #8 (1mm) swap to Dark Gray At layer #13 (1.6mm) swap to Bambulab Green At layer #16 (1.96mm) swap to Jade White for the rest. 🔵 Glaceon (90x240mm) 🔴 This Hueforge uses Bambu PLA Basic filament, other brands may not give the same results! 🟡 Print at 100% infill with a layer height of 0.12mm (Not 0.08mm like my other models). and a base layer of 0.16mm 🎨 4 Colour Print   Start with Black At layer #8 (1mm) swap to Dark Gray At layer #13 (1.6mm) swap to Turquoise At layer #16 (1.96mm) swap to Jade White for the rest. 🔵 Sylveon (90x240mm) 🔴 This Hueforge uses Bambu PLA Basic filament, other brands may not give the same results! 🟡 Print at 100% infill with a layer height of 0.12mm (Not 0.08mm like my other models). and a base layer of 0.16mm 🎨 4 Colour Print   Start with Black At layer #8 (1mm) swap to Dark Gray At layer #13 (1.6mm) swap to Hot Pink At layer #16 (1.96mm) swap to Jade White for the rest.