Type 2 EV Charging Cable Holder – Print-in-Place

⚡ Type 2 EV Charging Cable Holder – Print-in-Place Keep your EV charging cable organized, protected, and always within reach! This custom-designed Type 2 charging cable holder features a clever tilting locking mechanism that securely holds your charging plug when not in use. Unlike conventional fixed holders, the integrated moving socket allows you to insert, lock, and release your charging plug with a simple tilting motion. ✨ Key Features ✅ Print-in-Place Mechanism – The moving socket is printed directly inside the holder. ✅ No Assembly Required – No additional parts are needed for the tilting mechanism. ✅ Tilting Locking System – The integrated locking tab engages with the Type 2 plug to help prevent accidental removal. ✅ Easy One-Handed Operation – Simply lift the plug slightly to unlock and remove it. ✅ Clean & Organized – Keeps your charging connector neatly stored when not in use. ✅ Wall-Mounted Design – Compact construction with mounting holes for easy installation. ✅ Original Design – Independently designed and developed from scratch. 🔧 How It Works 1️⃣ Insert Slightly lift the movable socket and insert your Type 2 charging plug. 2️⃣ Lock Tilt the plug downward. The integrated locking tab engages with the connector and holds it in place. 3️⃣ Release Lift the plug slightly upward to disengage the locking tab, then pull the connector out. No buttons, springs, or complicated mechanisms required! 🖨️ Printing Recommendations Material: PETG or ASA recommended for outdoor applications. PLA: Suitable for indoor use or testing. Print the model in its intended orientation. Make sure the movable mechanism can move freely after printing. Avoid excessive force when freeing the mechanism for the first time. ⚠️ Important Notes Designed for Type 2 EV charging connectors. Connector dimensions may vary slightly between manufacturers. Test the fit and locking function before regular use. Use suitable mounting screws and anchors for your wall. For outdoor use, choose a filament with appropriate UV and temperature resistance. This is a mechanical storage holder, not an electrical charging component. ❤️ Support My Work If you like this design, please consider leaving a ⭐ rating, sharing your print, or boosting the model! Your support helps me create more functional and innovative 3D-printing designs. Designed by RestoreDoctor