Articulated Cute T-Rex (redesigned)

Some of you asked if I could make the head of my T-Rex rotate, so I decided to go back and redesign my original model! The head can now rotate, and I also redesigned the arms so they can simply be clipped into place with a little pressure. I also added another articulated segment to the T-Rex’s tail for even more movement.   And of course, the jaw is still movable too — he definitely hasn’t lost his bite! 🦖   There will be no multipart version available for this redesign.   Old Model Link:  https://makerworld.com/de/models/2229562-articulated-cute-t-rex   ℹ Tips for printing Multicolor: Filament: PLA Supports: No! Layer height: looks best in 0.16(0.15)mm / 0,2mm also works Wall loops: 3 Infill: 15% Seam position: back Wall generator: - Detect thin walls: - Brim: No! BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion! Info‼: You can scale the T-Rex bigger but not any smaller otherwise the Connectors will no longer work! ------------------------------------------------------ ❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use. ------------------------------------------------------   Colors and filament I used (4 Color): PLA Basic / BlueGrey PLA Matte / LightGrey PLA Matte / White PLA Matte / Black Or decide for yourself which colors and how many you want to use!   ℹ This model is very filament wasteful please keep that in mind! ------------------------------------------------------ ℹ New multicolor version (3mf)! This model is no longer pre-painted in the slicer – you can now freely choose which color goes where directly in your slicer for a better look and easier handling! (Quick tip: identical colors next to each other won’t work – always place different colors side by side to avoid potential issues.) Boost MeIf you enjoyed this model, please consider boosting it to support me to further develop creative and more cute looking designs🥰. Thank you!