22LR Suppressor

This is a rimfire k can model that can be found on the Sea by MiddletonMade. This model requires a ½-28 to ¾-16 thread adapter, you can get them on amazon for like 12 dollars. Amazon.com : 1/2 28 to 3/4 16.  There is also a printed on Maker World while you wait for the metal one to come. I recommend epoxying the adapter in the can. Here is the JB weld I use. Amazon.com: J-B Weld 50165 25ml Epoxy Syringe, Plain : Industrial & Scientific   Only PLA+ for limited use or PET, PPA-CF and Nylon filaments such as PA6-CF, PA6-GF, PA12-CF, and PA12-GF. ABSOLUTLEY NO PLA, PETG, ABS, or anything not listed. File and settings are set up and good to go using 300blkFDE's PA6-CF settings. It is preoriented and already has a brim, no supports are needed for this model. If you have any issues with print falling or moving during print you can increase brim size. Do not increase print speed, this needs to be made slowly to be strong.   Follow all federal, state, and local laws. I am not responsible for what you create and where you create it do your own research. Use at your own discretion.