Superhero Ghost

Superhero Ghost – Hanging LED Ghost 👻💪 Not all superheroes wear capes. Some wear bedsheets! 👻 Meet Superhero Ghost, a tiny hero with one big mission: holding up everything in your house! Well… at least looking like he does.  With his arm stretched high above his head, this little ghost looks like he's using all his superpowers to support a shelf, a lamp, or anything else you can imagine. I was honestly surprised by how many places around my house I managed to hang him. Shelves, lamps, metal railings… apparently, my house needed a superhero more than I thought! 😄 🧲 How Does He Hang? The secret behind his superpowers is a 6 × 3 mm magnet hidden in his raised hand. This allows him to attach to any suitable magnetic metal surface. No metal surface nearby? No problem! You can print the included mounting plate, which has a slot for a magnet, and glue it wherever you want. Alternatively, you can simply attach a thin steel plate to your chosen surface. 🔧 Magnet Size & Customization I used 6 × 3 mm magnets for this project, but don't worry if you have different ones. You can easily adjust the magnet holes in Bambu Studio by resizing the negative parts to match your magnets. Just remember to add 0.2 mm to both the diameter and height of your magnets to ensure a proper fit. For example, if you're using a 5 × 2 mm magnet, set the negative part to 5.2 × 2.2 mm. 👻 Two Versions – With or Without Legs Superhero Ghost comes with different options depending on whether you want him to glow or just hang around. Version with an LED Tealight If you're using an LED tealight candle, print the legs with the magnet slot. The magnet in the legs attaches to the metal battery casing inside the tealight, keeping everything in place. Important: Position the tealight exactly as shown in the photos so the legs fit correctly. Need to remove the tealight? Use a small screwdriver or a similar tool to gently push the battery through the opening in one of the ghost's eyes. Version Without a Light If you don't want to use an LED tealight, simply print the alternative legs with the cylindrical connector. The cylinder fits into the space normally occupied by the tealight, allowing you to complete the ghost without any lighting.   Or you can leave the legs off completely, just like a “real ghost” :D One Tiny Ghost, Endless Possibilities! Hang him under a shelf, on a metal railing, on a lamp, or anywhere else his magnetic superpowers can reach! Add an LED tealight for a warm, spooky glow, or keep him unlit for a simple decoration. Just remember: he may look strong, but he's not actually holding up your furniture! 😄 Have fun :) 👻💪