Baroque Wall Candle Sconce Holder

Infuse your home with the theatrical elegance of European manors and classic Rococo metalwork with this exquisite wall candle sconce. This unique three-dimensional model features a slender vertical backplate sculpted in a rich lattice of high-relief acanthus leaves, scrollwork, and a decorative crest. Curving gracefully outward is a swan-neck arm that supports a molded candle cup and a flared drip pan. It serves as a sophisticated wall lighting accent to frame vintage mirrors, flank doorway entries, or illuminate a Dark Academia reading nook with timeless charm. Tested Print Settings (Recommendations): The sharp scroll contours of the backplate, the smooth curve of the arm, and the drip pan details were successfully verified using matte black PLA. Infill: Printed at 12% to 15% (gyroid pattern) for the backplate. Mechanical & Safety Pro-Tip: Because the curved arm holds a candle in a cantilevered position, set 4 to 5 wall loops (perimeters) to heavily reinforce the arm joinery and back mounting slot. Using LED flameless taper candles is highly recommended for 3D-printed PLA. If utilizing real wax candles, ensure a small heat-resistant glass or metal liner is placed inside the socket to collect wax drips. Nozzle: 0.4 mm Supports: Fine tree supports are required beneath the lower curve of the cantilevered arm, under the drip pan lip, and behind the backplate scroll overhangs. Sizing Information: The model features an elongated, regal profile designed to fit beautifully on narrow wall segments. Please feel free to freely resize the model inside your slicing software to custom-tailor the inner candle socket width to your specific taper candle size.