SFS Flipper & Riser - Dual AMS 2 for H2C, H2D, H2S

Boost MeEnjoying the AMS Flipper?   Then please consider to give it a 🚀Boost🚀 and/or ⭐⭐⭐⭐⭐. I greatly appreciate any kind of support. Thank you very much.🚀 About the project: SFS stands for:  Steibock Flipper System. It's a slim and modular AMS Flipper&Riser system for the H2 printer series. It allows you to effortlessly tilt the AMS units backward, providing easy access to the print area from above. This is incredibly helpful for maintenance, cleaning, and clearing clogs without removing the AMS units.   🧩 System Components: The complete system consists of the following parts: Main Frame (Base)   AMS Flipper BracketsSingle AMS 2   (end of Oct.) Dual AMS 2  (this model) AMS 2 + AMS HT Combo More variants will follow!   Add-ons & ExtensionsAMS HT Side Mount   (end of Oct.) LED Kit    (end of Oct.) STEP Files Personalization Kit for rails and labels    (end of Oct.) Front Labels Collection   (mid of Nov.) More add-ons will follow!   ✨ Main features: Clever Design:Sleek yet sturdy system Easy assembly with detailed step-by-step assembly instructions Neat cable and PTFE tube management, thanks to included clips and cable winders Backside of the printer remains fully accessible      Comfort:Easy access to the print area from above, without having to remove the AMS units.   Integrable LED strips (8-12 mm) make maintenance easier with the printer turned off (optional, coming soon). Two flip positions: 50° - held on struts; only 70mm / 3" of space needed behind the printer   90° - held in place by its own weight (even with empty AMS)   Personalization:Rails and empty holes allow for unlimited expansions.   Exchangeable and customizable labels - create your own design. STEP files for rail inserts and labels will be provided Support:If you have any issues with the assembly or the models, I am here to help you.   🧵 Material Requirements PETG – Recommended and successfully tested ABS – Also possible, but not fully tested yet. PLA – Not recommended, because the material deforms under heat or constant stress.  Please make sure, your material is dried und well calibrated (especially pressure advance)   🖨️ Print Profiles I strongly recommend using the provided print profiles, as they include many part-specific optimizations.    The following print profiles are currently available: PETG with PLA support structures (recommended) PETG only ABS will follow later   🔩 Hardware & Assembly Instructions You will need some standard hardware (M3/M4 hex screws and magnets) to assemble this system for maximum stability. The exact bill of materials (BOM) and print settings are explained in detail in the attached Printing & Assembly Instruction PDF.  Please read it carefully before printing!   🔭 Outlook: This is just the beginning of the SFS ecosystem. Do you have ideas for new expansions or improvements?  Let me know in the comments or via DM!   Don't forget to follow my profile to not miss any upcoming modules!   🔗 Perfect Integration: Suitable PTFE Tube Feeds Check out my collection of PTFE feeders for the Filament Track Switch and TPU Feed Assist Modules, as well as for 4-in-1 adapter holders. They integrate seamlessly with the SFS Flipper system:   4-in-1 PTFE Adapter Mounts For users who do not use either a Filament Track Switch or a TPU Feed Assist module.     TPU Feed Assist mounts (with 4-in-1 holders) For users who use a TPU Feed Assist  module only.   V3 Compact Combo Mount  TPU Feed Assist & Filament Track Switch (with 4-in-1 holders) The all-in-one solution !!! Extremely slim and compact design.   V4 Low Friction Combo Mount  TPU Feed Assist & Filament Track Switch The all-in-one solution !!! Straightest possible filament path with minimal resistance.