Pumpkin Triple Spin Fidget (Print in Place)

This Pumpkin Triple Spin Fidget Toy turns a classic jack-o’-lantern into something you can’t stop fidgeting with. Three pumpkin-shaped layers nest inside each other and all pivot on a single middle axis, so each one spins smoothly and independently. The wavy, scalloped edges on every layer give it a bold pumpkin silhouette, and the cute little face on each side gives it a ton of personality. It’s fully print-in-place, so it comes off the build plate ready to spin with no assembly and no supports. Between the buttery smooth motion and the fun Halloween look, this is a great fidget for anyone who loves clever mechanisms and a spooky season print. There’s a multicolor version with a green stem and black face details, a single color version for a quick print, as well as a 12 pack of the multicolor version that saves on AMS waste, making it perfect to hand out to trick or treaters. Boost MeIf you like this model, please consider boosting it! It helps out a ton :)MembershipWant to sell my 3D printed fidget toys? Become part of my Commercial License Membership program!Printing Instructions: Prepare the Print BedClean the print bed thoroughly with isopropyl alcohol to ensure proper adhesion. Additional adhesive for the print bed is highly recommended! I suggest using 3D-Lac spray or a glue stick.   Download the Print ProfileSend the pre-configured print profile to your Bambu Lab printer through the Bambu Handy app or Download and open the pre-configured print profile in Bambu Studio.   Select Your Printing OptionsChoose your filament type and color. Select your print bed type (e.g., textured or smooth). Confirm your printer settings, ideally for a Bambu Lab printer.   Start PrintingBegin the print job. No supports are necessary.