Five Nights At Freddy's Feddy Head Minifigure

Custom Brick Compatible Five Night At Freddy's Freddy headpiece Notes The pictures shown above are of a finished version of the printed headpiece. The parts have been carefully (very lightly) sanded, primed, painted, and varnished. Please keep in mind that the printed model you receive/download will not look exactly like the pictures above. The pieces should come out clean and can also be used without painting. However, some light sanding or cleanup may still be needed depending on your printer and print settings. Printing & Supports Please be very careful when removing the supports, especially around parts like the teeth, Foxy's are pretty fragile. These parts are relatively delicate, so removing the supports too aggressively could damage them. The pieces were printed on a Bambu Lab A1 Mini using a 0.2 mm nozzle and the highest quality setting of 0.06 mm layer height. I highly recommend printing the model at 0.06 mm layer height to achieve the cleanest possible result and preserve the smaller details. Feedback & support  I'm still learning how to improve my model uploads and presentation, so feel free to leave a comment or give me some feedback if something isn't working as expected :).  If anyone has questions about the finishing process, such as the different primers, paints, or varnishes I used, feel free to ask! I'm always happy to help. Thank you so much for checking out my model, and I hope you enjoy printing it! Credits Modeled & sculpted by Wars4Bricks using Blender and Meshmixer.