Pikachu

Pikachu is ready for battle! ⚡ Featuring an adorable fighting pose, a determined expression, and its iconic lightning-bolt tail, this little Pikachu is ready to join your Pokémon collection! Model Height: 20 cm Two Printing Options Included: MULTIPART: Print individual parts separately and assemble them for a colorful finish without AMS. AMS MULTICOLOR: Print with multiple colors using an AMS system. Choose whichever method works best for your setup! 🔴 IMPORTANT WARNING – PETG PRINT PROFILE The supports in the PETG print profile are positioned closer to the model to minimize deformation and achieve a better overall print quality. As a result, the supports may be more difficult to remove. Please be patient and gentle during removal to avoid damaging your print. Please note: Surfaces that come into contact with supports may not be perfectly smooth. A little tip from my experience: I recommend lightly sanding the affected areas or carefully scraping along the surface with a blade to remove tiny bumps and imperfections. Afterward, you can briefly apply gentle heat with a heat gun to help reduce the white stress marks left on the plastic. Be very careful not to overheat the model, as excessive heat can deform PETG. A little extra patience during post-processing can make a big difference in the final result! Happy printing, and hope you enjoy your new Pikachu! ⚡