Glitchtrap Dummy 13 & Carbon 13

Glitchtrap Dummy 13 & Carbon 13   A fully articulated action figure of Glitchtrap from the Five Nights at Freddy's franchise, built using a combination of the Dummy 13 and Carbon 13 joint frameworks.   IMPORTANT ASSEMBLY NOTE: many of the joints in this figure are printed as separate individual parts. You will need to carefully insert and assemble these separate joint pieces into the corresponding sockets on the main body and limbs to complete the articulation.   HAND-PAINTED MODEL! The model shown in photos was manually painted using acrylic paints and markers.   IMPORTANT ASSEMBLY WARNINGS: • Glue May Be Required: Please note that some of the joints utilize a pegged/inset connection. The receiving holes for these pegs were intentionally designed with extra clearance to ensure smooth movement and prevent the parts from fusing together during printing. Because of this slightly loose fit, you may need to apply a small drop of super glue (cyanoacrylate) to secure these specific joints in place after assembly.   Printing Settings and Recommendations: • Supports: Required. Organic / Tree supports are highly recommended for clean overhangs and easier removal around the joints.  • Bed Adhesion: Using "Mouse Ear" brims on corners and small contact points is strongly recommended to prevent warping and dislodging during printing.  • Layer Height: 0.10 mm – 0.15 mm for smooth details and clean joint tolerances.  • Post-Processing: After printing, carefully remove all supports. Assemble the separate joint parts into the main body sockets as required, and gently articulate/break in the joints to free up movement. Apply glue to any loose pegged joints as mentioned above.   This model is completely non-commercial fan art created by kitbashing and modifying community assets. Original 3D base model sourced from Sketchfab, created by HarrisonHag1.  • This is unofficial, non-commercial fan art. All character rights for Glitchtrap and the Five Nights at Freddy's franchise belong to Steel Wool Studios and Scott Cawthon. No commercial use or sale of this model/print is permitted.   Boost MeIf you want to see more of these figures, please boost me! =)