Pokemon #470 - Leafeon Kit Card

Bring the magic of Pokémon to life with this Leafeon kit card!   This model prints flat and transforms into a fully assembled ~85mm display figurine of Leafeon that can stand on its own. Simply print, pop the pieces out, and assemble.   Features: Compact, print-in-place style kit card Cleanly separated parts for easy removal Designed for FDM 3D printing Beginner-friendly assembly Accurate proportions inspired by the classic Pokémon design Printing Notes: This kit card requires an AMS. Ensure the print bed is clean before printing. Let the print bed cool completely before removing the print. Removing early may warp the piece. While it may be possible to print a smaller or larger version, tolerances have not been tested for other sizes, so print at your own risk! Assembly Notes: There are a grand total of 10 pieces. The small connectors are all throwaways Both the Front and Back connectors have letters identifying them (F,B). The letters should point towards the tail. Each leg is numbered 1-4 and a leg map is provided below for easier assembly. Some of these pieces can be a little fragile due to their size. For better results, use a flush cutter when trimming and clean up with a knife Assembly GIF below, though hopefully most pieces are self explanatory!