FTN.6 Rimfire Suppressor - Knurled

This is airsoft use only. Do not attatch on any kind of firearm.    (First 3 shots are supers, last 3 are subs for reference.) Last pic is size reference of FTN.6 rimfire to FTN.5 slim rimfire. FTN.6 Being smaller package with less backpressure but louder.   This is the rimfire model from the FTN.6 pack. This model can be found on the Sea and is a part of the FTN.6. Unlike the FTN.5 this model uses a 1/2-28 to 5/8-24, because of this I highly recommend you epoxy the adapter into the can. Amazon.com: J-B Weld AutoWeld, 25ml, BLACK : Automotive. You can get a pair on amazon for like 12 dollars. Amazon.com : 1/2-28 to 5/8-24 adapter.  I would not reccomend running without epoxying the adapter in the can the threads are smaller and more fine then previous models.   PET, PPA-CF and Nylon filaments such as PA6-CF, PA6-GF, PA12-CF, and PA12-GF. ABSOLUTLEY NO PLA, PETG, ABS, or anything not listed. File and settings are set up and good to go using 300blkFDE's PA6-CF settings. It is preoriented and already has a brim, no supports are needed for this model. If you have any issues with print falling during print you can increase brim size. Do not increase print speed, this needs to be made slowly to be strong.   Follow all federal, state, and local laws. I am not responsible for what you create and where you create it do your own research. Use at your own discretion.