Customizable QR & NFC Display Stand

Customizable QR & NFC Display Stand A fully customizable 3D-printed QR & NFC display stand, designed for cafés, restaurants, retail stores, receptions, events, offices, or any space where you want to create a clean and professional digital touchpoint. The project is divided into separate parts and print plates, making it easy to print individual elements in different colors and assemble everything afterward. Fully Customizable Front Design The front panel can be customized to match your own brand or project. You can easily add or replace: Your own logo Custom text or messages Any SVG artwork or icon Your own QR code Website, menu, social media, Wi-Fi, reviews or app-download QR codes NFC links for websites, menus, apps, contact information and more SVG files can be imported directly into Bambu Studio, resized and positioned anywhere on the front panel. This means you can use the original design as a starting point and create a completely different version without redesigning the entire stand. Logo & SVG Inlay Technique The logo and decorative elements are designed as separate inserts rather than simply being printed on top of the main body. To create the recessed areas, the SVG was first imported into the main model as a Negative Part. The same SVG was then imported again as a separate Part to create the physical insert. The insert was resized approximately 0.1 mm smaller than the corresponding negative/recessed area. This small clearance makes it easier for the printed part to fit into the recess without forcing it. Depending on your printer calibration, filament and desired fit, you may need to slightly adjust this tolerance. This technique can be used with almost any SVG, allowing you to create custom logos, symbols, text or artwork that fits directly into the front panel. NFC Installation — Important The NFC section is designed to allow an NFC sticker/tag to be permanently embedded inside the printed part. For the provided print setup: PAUSE AT LAYER 62 → INSERT NFC STICKER → RESUME PRINT When the printer pauses, place the NFC sticker into the prepared cavity and make sure it is sitting correctly before resuming the print. The following layers will close the cavity and permanently hide the NFC tag inside the part. It is highly recommended to program and test your NFC tag before inserting it, as it will no longer be easily accessible once the print is completed. Printing & Assembly The individual components are placed on separate print plates to make printing, color selection and assembly easier. This also gives you more freedom when choosing your final color combination and avoids unnecessary filament changes during the main print. After printing, the logo and graphic inserts can be fitted into their corresponding recessed areas and the individual components assembled into the finished stand. Make It Your Own The goal of this design is not just to provide a ready-to-print QR/NFC stand, but also a customizable base for your own project. Replace the logo, import your own SVG graphics, change the colors, add your own QR code and program the NFC tag with whatever destination you need. Change the logo. Add your QR. Import your SVG. Program your NFC. Make it yours. Boost Me🚀 Support the Design Enjoyed this QR & NFC stand? A Boost helps support the development of more customizable, functional and carefully designed 3D-printable projects. Every Boost is appreciated — thank you! ❤️