Thermoformed Snowman Treat Holder & Hanging Decor

⛄ Hanging Snowman Treat Holder & Mesh Decor A festive, lightweight snowman wall decor piece featuring a mesh front and back pocket designed to hold small treats, candies, or LED tea lights! Perfect for Christmas decorations, holiday door hangers, or winter party favours. 🌟 Features Built-in Hanging Clip: Easy to hang on Christmas trees, doors, walls, or hooks using string, twine, or ribbon. Treat Cavity: Pop small wrapped sweets, chocolates, or fun-size treats into the rear cavity. Multi-Colour Mesh Details: Crisp contrasting black hat and buttons, orange carrot nose and twig arms, and a white mesh body. 🖨️ Printing Notes No Supports Required! AMS / Multi-Colour Ready: Pre-configured in the included .3mf print profile. Infill / Mesh: Model uses geometric mesh cut-outs for quick print times and low filament usage (~20–25g). Mould: Only need to print once, preferably using PETG but PLA works well too. 🛠️ Assembly & Shaping Instructions Print the Flat Mesh: Print the model completely flat on your build plate using the provided profile. Place in Mould: Align the flat print over your 3D-printed forming mould. Apply Heat: Gently warm the mesh area using a standard hair dryer (or heat gun on a low setting) for 5–10 seconds until the PLA becomes soft and pliable. Form the Pocket: Press the mesh down evenly into the mould cavity using a cloth or gloved hand until it takes the contoured shape. Cool & Set: Hold it in place for 10–20 seconds while it cools and hardens into shape! Nose: place the small pin through the mesh, add a dab of glue if needed and gently and carefully press the nose onto the pin and hold until glue holds. Designed for easy, fast printing on Bambu Lab printers (A1, A1 Mini, P1, X1 series).