FTN.5 Rimfire Slim Suppressor - Spiral

This is airsoft use only. Do not attatch on any kind of firearm.    This is the slim rimfire model made for pistols so you can use your sights, this model can be found on the Sea by PLABoi. This model requires a ½-28 to ¾-16 thread adapter, you can get them on amazon for like 12 dollars. Amazon.com : 1/2 28 to 3/4 16.  There is also a printed on Maker World while you wait for the metal one to come.   Only PLA+ for limited use or PET, PPA-CF and Nylon filaments such as PA6-CF, PA6-GF, PA12-CF, and PA12-GF. ABSOLUTLEY NO PLA, PETG, ABS, or anything not listed. File and settings are set up and good to go using 300blkFDE's PA6-CF settings. It is preoriented and already has a brim, no supports are needed for this model. If you have any issues with print falling during print you can increase brim size. Do not increase print speed, this needs to be made slowly to be strong.   Follow all federal, state, and local laws. I am not responsible for what you create and where you create it do your own research. Use at your own discretion.