Mini Spider Tea Light Lantern

Bring a spooky glow to your Halloween decor with the Spider Tea Light Lantern, a creepy-cute hanging spider designed to hold an LED tea light.   This design can be printed with and without AMS. The multi color stand only needs 10 color changes. It fits standard LED tea lights with a diameter of up to 40mm and heights up to 27mm (without flame). The parts simply click or screw together. The use of glue is not required, but it can be used for additional long-term stability. Disclaimer: This design can only be used with electric tea lights. Do not use real candles.     The A1 Mini version has a modified stand to fit the smaller build plate. Please see the photos for reference.     Print Settings I recommend printing the spider parts with 0.16mm layer height. I added small manual supports to the self supported regions. These are not necessary, but help to get better bridge quality.     Assembly Assembly is quick and easy and should only take about a minute.   First, snap the legs into the body. Be careful not to apply too much pressure. If they don't go in with gentle pressure, check the slots for any filament residue. To assemble the lid, click the loop piece into the lid from the inside, then snap in the threaded connector piece. Now insert your LED tea light and screw the lid into the body. The branch of the stand is simply pressed into the base. Be careful not to apply force to the spider web parts. Like this design? Check out my Halloween Collection for more! https://makerworld.com/en/collections/2376084 Want to sell prints of my designs? Commercial license available on Patreon and MakerWorld!