Hocus Pocus - Mary Sanderson

Hocus Pocus - Mary Sanderson   A user sugestion mixed with my own love of the timeless classic. A fun take on Mary Sanderson from the iconic film Hocus Pocus. This fan art figurine expesses the menace and fun of Halloween night. With her iconic hair, crooked lips and orange outfit, she is fun to display over the spooky season, for your desk, shelf or even for a friend.   Printed in parts, NO AMS needed, just some time and some glue. Eyes as always are a little fiddly, but when done they add alot of personality to the model. I have included print profiles for the full model and the AMS head if you dont want to try with the peices.    Installing the eyes; Get the three peices together with the coloured semi circle on the black eye part, then the white part, gripping the whole thing as one, gently drop the eye into the correct place starting towards the nose, when it is resting above the hole, just push down with your thumb to press them in.   📌 Recommended printing settings: Material: PLA Layer height: 0.16 mm Infill: 15% - (10% for the skirt) Nozzle: 0.4mm supports where nessesary - I have tried to make it so all have a surface contacting the plate however due to the detail and complexity of the modeling they sometimes require alot of support, so be aware and be carefull during support removal. Use a naked flame gentley and for short intervals to clean surfaces after removal   Assembly – Recommended Method on multipart models Dry fit: Assemble all parts without glue to check alignment and fit. Cleanup: Lightly deburr edges and pegs where nessesary with a file/modeling tool to ensure uniform contact. All parts are tested and fit together. Optional fix: Use glue for permanent assembly.