Fire distinguisher holder

Hello everyone. Here is another one of our models, primarily designed for ATVs but also suitable for use in other vehicles. A mount for a 1 kg fire extinguisher.   A simple print; printing with ASA filament is recommended if the part is to be used on ATVs and exposed to the elements and higher temperatures.   Boost MeIf you enjoy this and our other models, please press boost and support us so that we can create new, interesting, and useful things  In the profile of the model on the 3rd plate, you have a specially made bracket for CFMoto C4/C5 models so that they can be attached to the front end of the bracket. This is optional, and if you have another ATV you don't need it.     The model is designed exclusively for the device shown in the image below. You may be able to use for other extinguishers, but you must check first before printing. The dimensions of the fire extinguisher are:   The bracket is designed to be attached using two M6 countersunk screws, fitting into the provided holes. See the image below.   To attach the cover to the mounting bracket body, you need an M6x30 screw and an M6 lock nut with a nylon insert.   We made the lid handle using 25mm wide webbing cut to a length that suits you, and secured it with a PVC cable tie. See the image below.   I hope you find this to be a great model and enjoy printing and using it. Please share photos of your finished models so we can see the color combinations you’ve come up with.  We read all the comments.