Floating Ghost Dog Illusion [V3 – No AMS]

Floating Ghost Dog Illusion [V3 – No AMS] cute, friendly, and a 3D print with a big “wow” effect - Now available in color: a non-AMS version!     Updated Version [V3]:  - Now available in color: a non-AMS version! - The tolerances for inserting the chain into the collar have been increased. - Version 2 of the original (monochrome) can still be found on my profile.   Boost MeBoosts are fuel for my brain! :)  This adorable ghost dog brings a touch of magical Halloween spirit to your home. Thanks to its clever design, it appears to float in mid-air – held only by a chain that gently coils on the ground.   The little ghost dog looks cheerful and friendly rather than scary – a perfect decoration to make children smile. Whether placed on a shelf, a windowsill, or as a centerpiece for a Halloween party, it’s sure to catch everyone’s eye. Its playful shape and clean design make it a charming addition to any spooky setup.  This model is an evolution of my original Floating Ghost Dog illusion. Having gained a lot of experience with "No AMS" models over the past year, I wanted to release a "No AMS" version of my most popular model this year.   Check out other dog breeds and floating ghost in my Profil:   Please read before printing: This model features fine details and delicate structures. Make sure your print bed is clean and free from dust, grease, or residue to ensure strong adhesion. Place your printer on a stable, vibration-free surface, and confirm that vibration compensation is correctly calibrated. Before printing, double-check that your filament profile matches the material and that your bed temperature is properly set. For more tips on this topic, check out this video on YouTube. video (Youtube). Test your Printer with my Calibration Models:   Print Recommendation: I recommend printing this Models with the orignal intendet Print Profil: [V3- original] variable layers, optimised settings. This includes a layer height of 0.16 mm and the upper part of the dog head, eyes and nose with a layer height of 0.08 mm and hidden seams. The variable layer height is already set in the 3MF file.   Despite the nose, eyes, and pin / Head and Body sharing the same color, they were distributed across different print plates because they have different variable layer heights. The the Chain is set to 100% infill to balance the flying dog and keep it stable. The infill is already set in the 3MF file. The upright angled position of the dogs body on the print bed minimizes the chance of print errors and reduces both print time and the amount of support structures needed. Additional supports have been added to the "robe/skirt" edges to minimalize the risk of print errors. I recommend PLA Matte Bonewhite for the Dog and the settings in my print profil for a high quality print.   Support Structures: Be careful when removing the support structures at the top part of the chain to avoid breaking it. The Design and my Print Profil is designed with minimal but necessary supports.   Assemble: Included is a highly detailed, step-by-step assembly manual to download.  For assembly, I recommend using PLA glue or plastic glue, preferably a fast-drying one. I personally use German super glue. It dries within a few seconds and creates a very strong bond.     Check out my other Halloween Models:   Have fun printing!