Webber3D Chicken Nugget Clicker

Boost Me  🌟 Features & Highlights / 特色亮點 Interchangeable Sauce Flavor (醬料分件換色):🟠 Sweet & Sour Sauce / 經典糖醋醬 (The forever out-of-stock favorite! 總是缺貨的靈魂醬料) 🟤 Classic BBQ Sauce / 經典BBQ風味醬 Print in any color to invent your own custom dips (Honey Mustard, Spicy, etc.)! Optimized Realism (擬真選材):Recommended PETG for the dip container to mimic the real food-grade plastic tub feel. (醬料外盒建議使用 PETG，質感更接近真實塑膠醬盒) PLA for the nugget texture and sauce inserts. (雞塊本體與醬料環使用 PLA 列印) Keychain Ready (吊飾孔設計): Built-in hole on the corner so you can take your nuggets everywhere. (角端自帶掛孔，方便掛在包包或鑰匙圈上隨身按壓) 🛠️ Hardware Needed / 所需五金與工具 1× Standard MX Mechanical Switch (Cherry MX, Gateron, Outemu, etc. Clicky Blue switch recommended for extra satisfaction! / 標準 MX 十字機械軸 1 顆，推薦青軸手感更清脆) Super Glue / 快乾膠 (For securing parts / 用於固定軸體與醬料框) (Optional) Keychain ring / (選配) 鑰匙圈環 🖨️ Print & Assembly Guide / 列印與組裝指南 Print Settings (列印設定):Ready-to-print 3MF profile included. (已配置最佳 3MF 列印預設檔) Supports (支撐): Supports are pre-tuned in the profile and will peel off cleanly and effortlessly without scarring the surfaces. (支撐已優化調校，按照預設檔即可輕鬆完美拆除，不留殘痕) Layer Height (層高): 0.16mm - 0.20mm recommended for nugget texture definition. Assembly Steps (組裝步驟):Insert and glue the MX Switch into the central socket of the sauce tub. (將 MX 機械軸放入醬料盒中心卡槽並用快乾膠固定) Snap and glue your chosen Sauce Ring around the rim using the locating pins. (將選好的醬料環對準定位孔塗膠黏合) Push the Chicken Nugget keycap firmly onto the switch cross stem. (將雞塊鍵帽對準軸體的十字軸芯壓入裝妥即可) 📜 License & Support / 授權與支持 License: Free for Personal Use ONLY. Strictly NO Commercial Use / Reselling of prints or files. (僅供個人免費使用，嚴禁商業販售、翻印或再授權) If you like my designs and want to support my work, feel free to buy me a coffee! (如果您喜歡我的作品，歡迎請我喝杯咖啡支持更多創作！): 👉 https://buymeacoffee.com/webber0612