FarmLoop Stage 1 Snapmaker U1 - Automatic Printing

Boost MeBoost for more automatic printing systems for everybody!FarmLoop Stage 1 turns your Snapmaker U1 into an automatic printing machine using only 3D-printed parts. No electronics, free to print. How It Works Automated Detachment: after the print cools, the printer flexes its build plate in a controlled bend motion to break adhesion cleanly, no scraper required.  Safe Part Removal: a print-head-mounted pusher with a soft TPU face nudges the loosened part off the plate without scratching the model or the printer. Get the FarmLoop App These printed parts reach their full potential when driven by the FarmLoop App, which injects the G-code that controls plate bending, cooldown timing and pusher sweeps.  Standalone: the browser-based FarmLoop App has a free tier with core detachment presets and local processing, no installs, no cloud account. → https://app.3d-farmers.com/ Through the Skool community: VIP members get FarmLoop Pro for as long as they are VIP members, plus CAD courses, business playbooks and a network of makers. → https://www.skool.com/3dfarmers Stage 1 Limitations Reduced print height while the parts are installed. Limited detachment force: very large or strongly adhered prints, especially flat-bottomed parts on textured plates, may not release cleanly. For bigger parts, harder-to-release prints or enclosed-chamber materials, we recommend FarmLoop Stage 2, which uses an active actuator that only engages after the print finishes and applies far more bending force.   🛒 Stage 2 Hardware Kit for the U1 → https://3d-farmers.com/products/farmloop-stage-2-snapmaker-u1 🔧 Stage 2 printed parts on MakerWorld →    Happy looping!