Pokemon #116 - Horsea Kit Card

Bring the magic of Pokémon to life with this Horsea kit card!   This model prints flat and transforms into a fully assembled ~70mm display figurine of Horsea that can stand on its own. Simply print, pop the pieces out, and assemble.   Features: Compact, print-in-place style kit card Cleanly separated parts for easy removal Designed for FDM 3D printing Beginner-friendly assembly Accurate proportions inspired by the classic Pokémon design NEW!! An improved frame which now allows for cutting out the name plate! Collect them all! Printing Notes: This kit card requires an AMS. Ensure the print bed is clean before printing. Let the print bed cool completely before removing the print. Removing early may warp the piece. While it may be possible to print a smaller or larger version, tolerances have not been tested for other sizes, so print at your own risk! Assembly Notes: There are a grand total of 8 pieces. The small connectors are all throwaways The head piece includes a "B" on the side that should point towards the wing / fin The ear pieces each has a letter (L,R) representing their position when looking at the model from the front. The letter should point toward the wing / fin The nose & base slide into place. For the base piece, make sure to have connected the body pieces first. Some of these pieces can be a little fragile due to their size. For better results, use a flush cutter when trimming and clean up with a knife NEW!!! The frame is now posable as well, so be sure to include and assemble it ;) Assembly GIF below, though hopefully most pieces are self explanatory!