Microphone Pole Pedalboard Mount

Microphone Pole Pedalboard Mount by Southey for Artists Attach your microphone pole directly to your pedalboard setup with this heavy-duty, space-saving mount! Built specifically for live performance and studio reliability, this clamp keeps your rig clean without taking up valuable floor space with a heavy tripod base. I designed this for my Rockboard so please give feedback on your model / pedalboard so I can update more variations to suit your board!  📏 1. Choose Your Print File (Size & Angle) Measure your mic pole diameter carefully with calipers before printing: Pole Diameters Available: 20mm, 22mm, 25.5mm, 27.5mm Pedalboard Angles Available:0° (FLAT) 8° (PedalTrain / Temple Audio standard) 10° (Rockboard standard) 🔩 2. Required Non-Printed Hardware To assemble this mount, you will need to source the following hardware: 1x Bicycle Quick Release Seatpost Clamp (available on Amazon / Ebay)For 20mm & 22mm poles: Use a 28.6mm Clamp For 25.5mm & 27.5mm poles: Use a 31.8mm Clamp 2x M6 Hex Bolts & NutsLength: 30mm M6 bolts are ideal for Rockboard and thin rail mounting on Pedaltrain. ⚠️ Important: If your Pedaltrain board has thick hollow bars, measure your rails! You will need longer bolts (M6 x 40mm or 50mm) to clamp all the way around the board. 🖨️ 3. Recommended Print Settings Filament: PETG or ABS/ASA highly recommended for structural strength and stage durability. (PLA can be used for light home setup, but PETG handles live gig torque much better). Infill: 20-30% is fine but 80%+ recommended for long term strength Walls/Perimeters: 4 or 5 wall loops for extra clamping strength If you like this consider supporting me by STREAMING MY MUSIC “Southey” on Spotify. thankyou!